AK-HCU250PSJ AK-HCU250ESJ

AK-HCU250PSJ AK-HCU250ESJ

SKU: ACC-SW-AK-HCU250 Kategorie: ,

Opis

Low-cost construction of long-distance optical transmission camera systems with high image quality.

  • Long-distance transmission between camera and CCU is possible.
  • The compact, lightweight unit measures 2U in height and is rack-mountable.
  • 12G-SDI and 3G-SDI Quad Link output supported with 4K upgrade*.
  • RET input (two SDI channels) supported.
  • One intercom line and two audio lines.
  • 3G trunk and 3G prompter circuit between camera and CCU.
  • * An optional 4K/12G-SDI Interface Kit AK-HUC01 (sold separately) is required. See the page for more information.

Rear View

LEMO Connector Model

ST Connector Model

Specifications

General
Power Supply AK-HCU250PSJ/HCU250PJ : 100 V – 120 V AC, 50 Hz/60 Hz
AK-HCU250ESJ/HCU250EJ : 100 V – 240 V AC, 50 Hz/60 Hz
AK-HCU250PTJ : 100 V – 120 V AC, 50 Hz/60 Hz
Current Consumption 3 A
Capacity for Supplying Power to a Camera DC 190 V , 0.6 A (AK-HCU250PSJ/HCU250ESJ/HCU250PJ/HCU250EJ)
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 10% to 90% (no condensation)
Storage Temperature −20 °C to 60 °C (−4 °F to 140 °F)
Weight Approx. 7.4 kg (16.28 lb) (main unit only)
Dimensions (W x H x D) 424 mm x 88 mm x 401 mm
(16-5/8 inches x 3-7/16 inches x 15-13/16 inches)
(excluding protrusions)
Basic Items
System Format

1920×1080/59.94p/50p/29.97p/25p/23.98p

  • * when using AK-HUC01
    3840 x 2160/59.94p/50p/29.97p/25p/23.98p
Image Input/Output Sections
<HD SDI 1-3> Terminal BNC x 3 3G/1.5G-SDI: 0.8 V [p-p], 75 Ω
<HD SDI PM> Terminal BNC x 1 1.5G-SDI: 0.8 V [p-p], 75 Ω
<RET IN1-2> Terminal BNC x 2 (internal FS) 3G/1.5G-SDI: 0.8 V [p-p], 75 Ω
<HD SDI PROMPTER IN> Terminal BNC x 1 (internal FS) 3G/1.5G-SDI: 0.8 V [p-p], 75 Ω
<HD SDI PROMPTER OUT> Terminal BNC x 1 3G/1.5G-SDI: 0.8 V [p-p], 75 Ω
<HD TRUNK OUT>Terminal BNC x 1 3G/1.5G-SDI: 0.8 V [p-p], 75 Ω
<REF> Terminal BNC x 2 <Input> 3-value sync/1 V VBS signal [p-p], 75 Ω
<Loop-through output> 3-value sync/1 V VBS signal [p-p], 75 Ω
<ANALOG PROMPT IN> Terminal BNC x 1 VBS signal: 1 V [p-p], 75 Ω
<ANALOG PROMPT OUT> Terminal BNC x 1 VBS signal: 1 V [p-p], 75 Ω
Audio Output Sections
<MIC1-2> Terminal XLR x 2, 3-pin male, 0 dBm/600 Ω
Intercom Section
<INTERCOM> Terminal XLR x 1, 5-pin female
Other Input/Output Sections
<CAMERA> Terminal Optical fiber multi connector x 1
AK-HCU250PSJ/HCU250ESJ: LEMO
AK-HCU250PJ/HCU250EJ: Tajimi Electronics Co., Ltd.,
AK-HCU250PTJ:ST connector x2
<ROP> Terminal 10 pins x 2
<COMMUNICATION> Terminal 25 pins x 1
<LAN> Terminal RJ45 x 1

Related Products