AK-UCU710PSJ/ESJ (LEMO Connector Model)

AK-UCU710PSJ/ESJ (LEMO Connector Model)

SKU: ACC-SW-AK-UCU700 Kategorie: ,

Opis

Camera Control Unit (CCU) ST 2110 Dante® Audio NDI® SRT
4K HD JPEG XS
ST 2110 and Dante®
Installed Model		 LEMO AK-UCU710PSJ / AK-UCU710ESJ ✔
Standard		 ✔
Standard		 ✔
Standard		 ✔
Standard		 Sold separately
Streaming option
(AK-NP703G)
Tajimi AK-UCU710PJ / AK-UCU710EJ
Basic Model LEMO AK-UCU700PSJ / AK-UCU700ESJ Sold separately
ST 2110 option
(AK-NP701G)		 Sold separately
Dante audio option
(AK-NP702G)		 Sold separately
Streaming option
(AK-NP703G)
Tajimi AK-UCU700PJ / AK-UCU700EJ

Supports simultaneous 4K HDR and HD SDR, plus ST 2110 and Dante®

The AK-UCU700 CCU supports the next-generation SMPTE ST 2110*1 IP-transmission standard as well as JPEG XS to uncompress/compress 4K video by a factor of 10 without degrading quality. As the studio camera system to support the Dante®*2 network audio standard as well as the NDI® (NDI® High Bandwidth)*3 and SRT (Secure Reliable Transport)*3 IP transmission standards, Panasonic Connect’s new CCU realizes diverse networks and applications for IP studio camera systems.

  • Simultaneous output of HDR and SDR (BT.2020 and BT.709).
  • Eight standard outputs, including two 12G-SDI outputs.
  • Compatibility with the ST 2110*1 and support for Dante®*2 audio network as well as NDI® and SRT*3
  • 3.5-inch color LCD touch panel for intuitive operation and viewing camera output.
  • Uncompressed optical transmission between camera and CCU over distances up to about 2,000m.*4
  • High-speed shooting: Up to 4x in HD and 2x in 4K.
  • Uncompressed or JPEG XS 4K/HD IP transmission with ST 2110/NMOS option.*1
  • Redundant operation with two SFP28 terminals.*5
  • Use connected PC browser to remotely configure settings.
  • *1: Standard in AK-UCU710/UCU710S and optional in AK-UCU700/UCU700S (requires ST 2110 option AK-NP701G sold separately).
  • *2: Standard in AK-UCU710/UCU710S and optional in AK-UCU700/UCU700S (requires Dante® audio option AK-NP702G sold separately). Audinate®, the Audinate logo and Dante® are registered trademarks of Audinate Pty Ltd.
  • *3: Requires AK-NP703G streaming output option sold separately.
  • *4: When power is supplied from CCU.
  • *5: AK-UCU700 requires the ST 2110 option AK-NP701G for SFP28 connection.
  • * NDI® is a video connectivity technology and is registered as a trademark by Vizrt NDI AB in the United States and other countries.

Supported Formats

UHD 3840 x 2160/59.94p, 50p, 29.97p, 25p, 23.98p
HD 1080/59.94p, 50p, 59.94i, 50i,
29.97p, 29.97PsF, 25p, 25PsF, 23.98p, 23.98PsF, 23.98p over 59.94i
HD High Speed [When connected to AK-UCX100]
2160/x2 -120fps, 100fps

1080/59.94p-240fps, 180fps, 120fps,
1080/50p-200fps, 150fps, 100fps,
1080/59.94i-240fps, 180fps, 120fps,
1080/50i-200fps, 150fps, 100fps

Rear View*1

  • *1: When all options are installed:
    ・AK-UCU710/UCU710S
        + AK-NP703G (Sold Separately)
    ・AK-UCU700/UCU700S
        + AK-NP701G (Sold Separately) *2
        + AK-NP702G (Sold Separately)
        + AK-NP703G (Sold Separately)
  • *2: Optical communication module is not included. A third-party optical module must be purchased separately.

ST 2110 interface option for AK-UCU700/UCU700S

ST 2110 option to be attached to the rear terminal of AK-UCU700/UCU700S*

ST 2110 option

AK-NP701G

  • Compatible with SMPTE ST 2110, AMWA NMOS IS-04 and IS-05.
  • Redundant connection via SFP+/SFP28 slots x 2 (25-FEC/25G/10G switching).
  • Uncompressed 4K/FHD or JPEG XS with visually lossless image quality.
  • * Available as standard feature on the AK-UCU710/UCU710S.

Dante audio interface option for AK-UCU700/UCU700S

Dante audio option to be attached to the rear terminal of AK-UCU700/UCU700S*

Dante audio option

AK-NP702G

  • Compatible with the Dante® digital audio network system.
  • Redundant connection via RJ45 slots x 2 (primary, secondary).
  • Audio input/output such as camera microphone output (2ch) and return audio input from intercoms or digital mixers.
  • * Available as standard feature on the AK-UCU710/UCU710S.

Streaming I/O option for AK-UCU700/UCU700S/UCU710/
UCU710S

Streaming I/O options such as NDI® and SRT to be attached to the rear terminal of AK-UCU700/UCU700S/UCU710/UCU710S

Streaming option

AK-NP703G

  • Compatible with NDI® high bandwidth and SRT (Secure Reliable Transport).
  • Return video signal/prompter signal (switching) input and output from camera main line/monitor/TRUNK (switching).
  • RJ45 x 1

IP based studio camera system

Specifications

AK-UCU710PSJ/ESJ, AK-UCU710PJ/EJ AK-UCU700PSJ/ESJ, AK-UCU700PJ/EJ
Power Supply 100 V – 240 V AC, 50 Hz/60 Hz
Power Consumption 550 W
(Without camera connected: 130 W)
Capacity for Supplying Power to a Camera AC 240 V (tolerance 5％), 1.46 A、50 Hz/60 Hz
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 10 % to 90 % (no condensation)
Storage Temperature –20 °C to 60 °C (–4 °F to 140 °F)
Weight AK-UCU710: Approx. 9.3 kg (20.46 lb) AK-UCU700: Approx. 9.1 kg (20.02 lb)
Dimensions (W x H x D) 424 mm x 88.5 mm x 400 mm
(16-11/16 inches x 3-15/32 inches x 15-3/4 inches) (excluding protrusions)
Video Output 3G/HD-SDI: 5 lines
12G/6G/3G/HD-SDI: 2 lines
HD-SDI: 1 line (shared with picture monitor output*1)
HD TRUNK output 3G/HD-SDI: 1 line
AUX Output 3G/HD-SDI: 1 line
Return Input 3G/HD-SDI: 4 lines
HD TRUNK (Prompter) input 3G/HD-SDI: 1 line
Reference Input BB (black burst) / tri-level*2: 1 line
(automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output)
Microphone Output 0 dBm/600 Ω, 2 lines (XLR, 3-pin, male)
Communication Intercom input/output (ENG/ PROD, 0 dBm, 600 Ω (4 W) /
1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM): 2 lines
V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM): 2 lines*1
PGM input (0 dBm/600 Ω): 2 lines
Tally input (red, green, yellow): 1 input each
Tally Output Tally output (red, green) Alarm output Output from each of the open collectors
ROP RS-422
1 line, 16 V DC output
MSU RS-422 1 line, GPI for control
LAN TRUNK LAN connection with camera side via an optical cable
1 line
LAN Personal computer connection for distribution via the Web
1 line
LCD monitor 3.5 inch color LCD monitor, touch panel supported
ST 2110*3 SFP+/SFP28 x 2 (for ST 2110 connection) SFP+/SFP28 x 2 (for ST 2110 connection)

* When AK-NP701G (sold separately) is installed.
Dante®*4 RJ45 x 2 (Primary, Secondary) RJ45 x 2 (Primary, Secondary)

* When AK-NP702G (sold separately) is installed.
  • *1: Depending on the setting, only one of them can be selected at one time.
  • *2: The BB (black burst) signal and tri-level sync signal of the reference input are recognized automatically.
  • *3: Standard in AK-UCU710S/UCU710 and optional in AK-UCU700S/UCU700 (requires ST 2110 interface board sold separately).
  • *4: Standard in AK-UCU710S/UCU710 and optional in AK-UCU700S/UCU700 (requires Dante® interface board AK-NP702G sold separately).

Related Products